陶瓷纤维油石
规格:多种
所属类型:磨石、油石
- 价 格:面议
- 发布时间:2023/6/14 11:15:04
- 数 量:大量
- 所在地:江苏 无锡
产品介绍
产品描述
日本XEBEC陶瓷纤维油石
The standard Xebec Ceramic Fiber Stone. Excellent polishing performance for material under HRC57.
标准型陶瓷纤维油石。 对硬度HRC57以下之材料拥有杰出的抛光性能。
|
|
Features 特性
-
Through the utilization of aerospace materials (Alumina Fiber Filaments), breakage, cracking, and chipping have been eliminated. High polishing efficiency can be ensured.
-
No clogging. Uniformly fine finishes can be achieved.
-
Thanks to the braided structure of the rod type, high polishing efficiency is possible even with the side, of the tool, and there is no splitting of the tip. (#220 is designed in a two way liner structure)
-
Suitable for fine deburring.
-
Higher polishing efficiency can be achieved by using the Meister Finishi with tools (electric, air, ultrasonic)
-
Coarse grit type made of thick Alumina Fiber Filaments is ideal for removing EDM scales. Only XEBEC can manufacture it.
-
-
本产品采用 适合研磨的结晶结构,实现了高研磨功效。
-
本品纤维交叉排列,可纵横向滑动,提高研磨速度及油石强度。
-
本品沙粒不易脱落,研磨工件表面不会有划痕产生。
-
研磨时几乎不会有热度产生,不会造成工件变热和油石劣化。
-
油石形状可任意修整,自由改变。
|
Structure 结构
|
■XEBEC’s innovative Original Structure 的结构
|
|
|
-
No breakage during highe speed rotation!!
-
Thanks to the braided structure, the side of the tool can polish!
-
Polishing performance increases substantially when high-speed polishing becomes with a hand grinder!
|
|
|
Meister Finishi Rod Type Structure
Meister Finishi rod type is braided structure of alumina fiber filaments.
The structure below φ2mm or equivalent to #220(Gray) is as follows.
【Alumina fiber filaments structure】
The bundles of alumina fiber filaments cross and set in each other.
【Effect】
Not easy to break or tear, and longer tool life.
Both a side and a tip of the tool can polish .
Made of the plate as shown left photo.
|
|
|
■Comparison in Structure and Features with Common Abrasive Stone 与普通油石的比较
|
|
|
XEBEC Meister Finish
|
common abrasive stone
|
Structure
|
|
|
No breakage
|
No breakage even though it’s only 0.5mm thick and 150mm long. Perfect for polishing on narrow areas such as ribs of plastic molds.
|
Sizes less than 3mm thick are not available as they are easy to break. So polishing narrow areas is impossible.
|
Superior polishing efficiency
|
|
Since it doesn’t crack, high polishing efficiency can be achived when using it xith ultrasonic, air, electrical tools.
|
|
Due to high ALF contents (up to 85%) high density and continuous cutting edges, superior polishing performance continues.
|
|
|
As it breaks easily, not suitable for the use with ultrasonic, air, or electrical tools.
|
|
Abrasive grain makes up only 30% total weight.
|
|
Due to grain fall out, grinding performance is unstable and tool life is short
|
|
No clogging
|
Thanks to the self –sharpening action, it resists clogging. Self-sharpening; ALF gradually cleaves by itself and generates new cutting edges, even though binders are consumed during polishing.
|
New cutting edges are generated after grain fall r, abrasive grains clog the blank holes created when the grains fall out .Easily clogged.
|
Uniformed fine finishing
|
Thanks to the even diameter of ALF, surface roughness of the finished surface is superior.
|
Due to the variation of abrasive grains diameters, uniform finishes are difficult to achieve..
|
No chipping
|
Thanks to the continuous ALF, grains do not fall out and no scratching occurs.
|
Scratches are caused on the finished surface by fallen out grains.
|
|
Usage, Applications 用途及应用范围
|
■Usage 用途
-
Ideal for precise polishing of free surfaces, free curves, ribs, bosses, etc., of various forming molds (especially plastic mold).
-
High finishing efficiency can be achieved without clogging, even for metals such as aluminum, copper, gun metal, etc., which clogs with common abrasive stones.
-
Can be used in narrow areas where common abrasive stones cannot be used because of breaking.
-
Use on complex shapes where uniform finishing could not be previously attained.
-
Efficient EDM scales removal.
-
陶瓷纤维油石(俗称超级油石)系将高纯度之陶瓷纤维与热塑性树脂结合制造而成,具有高硬度、耐磨耗及不易折断的特性。
-
除可用于手持研磨外,且适用于气动、电动往复式研磨机。在超音波振动研磨机上使用,效果 佳。
-
陶瓷纤维油石可在各种不同材质的模具钢上研磨加工。 适用于一般难研磨加工处,如窄沟壁、沟底、孔、滑痕、肋部及微小精细处。
-
尤其对于放电加工后积碳层的快速去除及抛光效果更佳。
|
|
■Applications 应用范围
Usage
|
Meister Finish (Stick type) 平板型
|
Meister Finish (Rod type) 圆棒型
|
Die and Mold Finishing
|
-
Removing EDM scales
-
Polishing precise area
-
Finishing ribs
-
Finishing edges, corners
[Target] For resin, rubber, die castings etc. (Softer than HRC57)
|
-
Removing EDM scales
-
Polishing precise areas
-
Finishing edges, corners to be rounded
-
Finishing bosses
-
Finishing runners, sprues and sub-gates
[Target] For resin, rubber, die castings etc. (Softer than HRC57)
|
Deburring
|
|
-
Deburring parts for communication and optical instruments
-
Fine deburring of nozzle
-
Deburring edges of cutting tool blades .
-
Fine deburring after machine processing
|
Others
|
|
-
For dental molds (2.34)
-
For metal-curving
|
|
Comparison 对比
|
■Performance Comparison with Competitors (SS)
|
|
|
|
-
The most widely used SS product is “Blue”. (60% of all SS products) Please refer to the line graph.
-
Users of S‘s “Blue” use it to achieve surface roughness shown by
-
The same degree of surface roughness can be achieved by XEBEC’s “Orange”
-
For the user to achieve this surface roughness using S’s “Blue” would result in the finishing removal rate shown in bar graph ;Using XEBEC’s “Orange” would result in bar graph ,making it 4 times more efficient in polishing.
|
Use
|
■Meister Finish (Stick type) 平板型
|
|
Efficient use 有效用法
|
Picture 图片
|
Use the tip at an angle to the surface of a workpiece. 使纤维油石与工作表面形成成一定角度。
|
Approximately 5~45 degrees is effective. 具效率的角度大约为 5~45 度。
|
|
|
Polishing and deburring using the side of the tool. 使用油石侧边进行抛光或去毛刺。
|
There is no polishing ability on the surface of the tools. 油石的正面不具有抛光能力。
|
|
|
Use with vibration tools (ultrasonic, air, electric etc.) 配合往复工具使用(气动/电动超声波)
|
XEBEC Heat-Resistant Ceramic Abrasives are ideal for ultrasonic tools. XEBEC 耐热陶瓷油石是超声波工具的理想搭档
|
|
Ideal tool length depends on each ultrasonic tool. If a tool is not mounted on the ultrasonic tool securely, exessive heat may be generated. 要根据所使用的超音波工具选择适当的油石长度,如果油石没有夹紧,有可能会造成油石过热。
|
|
|
Forming (Shaping the tip of a tool in accordance with the shape of a workpiece.) Dressing 可根据需要将油石修正成型
|
For easy and perfect dressing, use an electrodeposited diamond stone. Perform cutting same way. 可用金刚石油石轻松的进行修正
|
|
|
Coolant will increase efficiency. 使用冷却液可提高工作效率。
|
Coolant is recommend when polishing plastic molds. 进行塑料模具抛光时,推荐使用冷却液。
|
|
|
|
|
■Meister Finish (Rod type) 圆棒型
Thanks to braided structure, the side of the tool can polish ! 得益于辨状结构,油石的侧面可以用于抛光!
|
|
|
Efficient use 有效用法
|
Picture 图片
|
Polishing and deburring using the tip or side of a tool. 油石顶端和侧面均可用于抛光或去毛刺。
|
Polishing using the entire surface of a tool is possible thanks to the braided Alumina Fiber stuructur. 得益于氧化铝辨状结构,油石的整个侧面都可用于抛光!
|
|
|
Use with hand grinders or vibration tools (ultrasonic, air, electric etc.). 可配合手持研磨机或往复工具(气动/电动超声波)使用
|
Use at less than the maximum rpm of 30,000 and less than 50mm in length. When using with ultrasonic tool, piease refer to “Stick type”. 请使用50mm以内的油石, 转速请不要超过30,000rpm。
|
|
|
Forming(Shaping the tip of a tool in accordance with the shape of a workpiece.) Dressing 可根据需要将油石修正成型
|
For easy and perfect dressing, press a tool rotating in a hand grinder onto an electrodeposited diamond stone. Do cutting same way. 可用金刚石油石轻松的进行修正 Thanks to the braded structure, there is no splitting of the tip even when it is made into a fine point. 得益于辨状结构,即使将尖端修整得极细也不会分叉。
|
|
|
Coolant will increase efficiency. 使用冷却液可提高工作效率。
|
Coolant is recommend when polishing plastic molds. 进行塑料模具抛光时,推荐使用冷却液。
|
|
|
|
|
■Meister
Stick type Lineup 平板型
|
|
Dimensions (mm)
|
Red equivalent to #1200
|
White equivalent to #1000
|
Blue equivalent to #800
|
Black equivalent to #600
|
Orange equivalent to #400
|
Light Brown equivalent to #300
|
Dark Brown equivalent to #220
|
Violet equivalent to #120
|
0.3x4x100
|
AR-0304M
|
AW-0304M
|
AB-0304M
|
AP-0304M
|
AO-0304M
|
AL-0304M
|
AD-0304M
|
–
|
0.4x4x100
|
AR-0404M
|
AW-0404M
|
AB-0404M
|
AP-0404M
|
AO-0404M
|
AL-0404M
|
AD-0404M
|
–
|
0.5x4x100
|
AR-0504M
|
AW-0504M
|
AB-0504M
|
AP-0504M
|
AO-0504M
|
AL-0504M
|
AD-0504M
|
–
|
0.5x4x150
|
AR-0504L
|
AW-0504L
|
AB-0504L
|
AP-0504L
|
AO-0504L
|
AL-0504L
|
AD-0504L
|
–
|
0.5x6x100
|
AR-0506M
|
AW-0506M
|
AB-0506M
|
AP-0506M
|
AO-0506M
|
AL-0506M
|
AD-0506M
|
–
|
0.5x6x150
|
AR-0506L
|
AW-0506L
|
AB-0506L
|
AP-0506L
|
AO-0506L
|
AL-0506L
|
AD-0506L
|
–
|
0.5x10x100
|
AR-0510M
|
AW-0510M
|
AB-0510M
|
AP-0510M
|
AO-0510M
|
AL-0510M
|
AD-0510M
|
–
|
0.5x10x150
|
AR-0510L
|
AW-0510L
|
AB-0510L
|
AP-0510L
|
AO-0510L
|
AL-0510L
|
AD-0510L
|
–
|
0.8x4x100
|
AR-0804M
|
AW-0804M
|
AB-0804M
|
AP-0804M
|
AO-0804M
|
AL-0804M
|
AD-0804M
|
–
|
0.8x4x150
|
AR-0804L
|
AW-0804L
|
AB-0804L
|
AP-0804L
|
AO-0804L
|
AL-0804L
|
AD-0804L
|
–
|
0.8x6x100
|
AR-0806M
|
AW-0806M
|
AB-0806M
|
AP-0806M
|
AO-0806M
|
AL-0806M
|
AD-0806M
|
–
|
0.8x6x150
|
AR-0806L
|
AW-0806L
|
AB-0806L
|
AP-0806L
|
AO-0806L
|
AL-0806L
|
AD-0806L
|
–
|
0.8x10x100
|
AR-0810M
|
AW-0810M
|
AB-0810M
|
AP-0810M
|
AO-0810M
|
AL-0810M
|
AD-0810M
|
–
|
0.8x10x150
|
AR-0810L
|
AW-0810L
|
AB-0810L
|
AP-0810L
|
AO-0810L
|
AL-0810L
|
AD-0810L
|
–
|
1.0x1x100
|
AR-1001M
|
AW-1001M
|
AB-1001M
|
AP-1001M
|
AO-1001M
|
AL-1001M
|
AD-1001M
|
–
|
1.0x2x100
|
AR-1002M
|
AW-1002M
|
AB-1004M
|
AP-1002M
|
AO-1002M
|
AL-1002M
|
AD-1002M
|
AV-1002M
|
1.0x4x100
|
AR-1004M
|
AW-1004M
|
AB-1004M
|
AP-1004M
|
AO-1004M
|
AL-1004M
|
AD-1004M
|
AV-1004M
|
1.0x4x150
|
AR-1004L
|
AW-1004L
|
AB-1004L
|
AP-1004L
|
AO-1004L
|
AL-1004L
|
AD-1004L
|
AV-1004L
|
1.0x6x100
|
AR-1006M
|
AW-1006M
|
AB-1006M
|
AP-1006M
|
AO-1006M
|
AL-1006M
|
AD-1006M
|
AV-1006M
|
1.0x6x150
|
AR-1006L
|
AW-1006L
|
AB-1006L
|
AP-1006L
|
AO-1006L
|
AL-1006L
|
AD-1006L
|
AV-1006L
|
1.0x8x100
|
AR-1008M
|
AW-1008M
|
AB-1008M
|
AP-1008M
|
AO-1008M
|
AL-1008M
|
AD-1008M
|
AV-1008M
|
1.0x8x150
|
AR-1008L
|
AW-1008L
|
AB-1008L
|
AP-1008L
|
AO-1008L
|
AL-1008L
|
AD-1008L
|
AV-1008L
|
1.0x10x100
|
AR-1010M
|
AW-1010M
|
AB-1010M
|
AP-1010M
|
AO-1010M
|
AL-1010M
|
AD-1010M
|
AV-1010M
|
1.0x10x150
|
AR-1010L
|
AW-1010L
|
AB-1010L
|
AP-1010L
|
AO-1010L
|
AL-1010L
|
AD-1010L
|
AV-1010L
|
*1.5mm, 2.0mm and 3.0mm thickness products are available.
|
■Meister Finish
Rod type Lineup 圆棒型
|
Dimensions(mm)
|
Red equivalent to #1200
|
White equivalent to #1000
|
Blue equivalent to #800
|
Black equivalent to #600
|
Orange equivalent to #400
|
Light Brown equivalent to #300
|
Gray equivalent to #220
|
1×50
|
PR-10S
|
PW-10S
|
PB-10S
|
PP-10S
|
PO-10S
|
PL-10S
|
PM-10S
|
1×100
|
PR-10M
|
PW-10M
|
PB-10M
|
PP-10M
|
PO-10M
|
PL-10M
|
PM-10M
|
1.5×50
|
PR-15S
|
PW-15S
|
PB-15S
|
PP-15S
|
PO-15S
|
PL-15S
|
PM-15S
|
1.5×100
|
PR-15M
|
PW-15M
|
PB-15M
|
PP-15M
|
PO-15M
|
PL-15M
|
PM-15M
|
2×50
|
PR-20S
|
PW-20S
|
PB-20S
|
PP-20S
|
PO-20S
|
PL-20S
|
PM-20S
|
2×100
|
PR-20M
|
PW-20M
|
PB-20M
|
PP-20M
|
PO-20M
|
PL-20M
|
PM-20M
|
2.34×50
|
PR-234S
|
PW-234S
|
PB-234S
|
PP-234S
|
PO-234S
|
PL-234S
|
PM-234S
|
3×50
|
PR-30S
|
PW-30S
|
PB-30S
|
PP-30S
|
PO-30S
|
PL-30S
|
PM-30S
|
3×100
|
PR-30M
|
PW-30M
|
PB-30M
|
PP-30M
|
PO-30M
|
PL-30M
|
PM-30M
|
3×150
|
PR-30L
|
PW-30L
|
PB-30L
|
PP-30L
|
PO-30L
|
PL-30L
|
PM-30L
|
6×50
|
–
|
–
|
–
|
–
|
–
|
–
|
PM-60S
|
6×100
|
–
|
–
|
–
|
–
|
–
|
–
|
PM-60M
|
■Meister Finish
XEBEC Meister Finish Pencil Tipe & XEBEC Pencil Type Holder Lineup 新品:笔形油石和笔形油石夹
|
Dimensions (mm)
|
Red equivalent to #1200 (3 pieces packed)
|
Blue equivalent to #800 (3 pieces packed)
|
Corresponding Pencil Type Holder
|
0.5×0.5×50
|
3PACK-AR-0505S
|
3PACK-AB-0505S
|
PCL-5
|
0.9×0.9×50
|
3PACK-AR-0909S
|
3PACK-AB-0909S
|
PCL-9
|
Three stones are packed for one set of XEBEC Meister Finish Pencil Type. 每只包装有3根油石,不包括油石夹。
(XEBEC Pencil Type Holder is not included.)
|
|
|
|
以上是陶瓷纤维油石的详细信息,如果您对陶瓷纤维油石的价格、厂家、型号、图片有什么疑问,请联系我们获取陶瓷纤维油石的信息
免责声明:以上信息由企业自行提供,内容真实性、准确性和合法性由发布企业负责,标准件网不承担任何保证责任。
风险防范建议:为保障您的利益,建议优先选择标准件网认证会员。